Kawasaki Z1-KZ Chassis

Prices based on Japanese RRP
Includes air freight to Z1Shop and 10% GST
Exchange Rate 1 AUD = 63.1400 JPY (ANZ)

Click any image for a detailed view

81-5396   Handlebar Mount Kit Z1-KZ

81-5396 Set of 4 x chrome plated bolts and spring washers for handle bar clamps.

Models: 72-75 Z1, 76-80 Z900-1000

Out of stock 
$49.35  
No Stock

156-5392   Head Stem Bolt Kit Z1-KZ

156-5392 Chrome plated bolt and washer set for top clamp.

Models: 72-75 Z1, 76-80 Z900-1000

$59.22  
Disabled

81-5393   Head Stem Nut Kit Z1-KZ

81-5393 Chrome plated head stem adjusting nut and washer. Looks better and lasts longer than the original zinc plated finish.

Models: 72-75 Z1, 76-80 Z900-1000

$59.22  
Disabled

81-5394   Top Clamp Bolt Kit Z1-KZ

81-5394 Set of chrome plated bolts, washers and dome nut for top triple clamp.

Models: 72-75 Z1, 76-80 Z900-1000

$59.22  
Disabled

81-5395   Lower Clamp Bolt Kit Z1-KZ

81-5395 Set of 2 x special chrome plated bolts and spring washers for front fork mount on bottom triple clamp

Models: 72-75 Z1, 76-80 Z900-1000

$39.48  
Disabled

81-5391   Stainless Head Stem Bolt Kit Z1-KZ

81-5391 Trick looking stainless steel bolt kit for upper and lower triple clamps.

Models: 72-75 Z1, 76 Z900, 77-80 Z1000

$59.22  
Disabled

81-5161   Tapered Roller Head Stem Bearings Z1-KZ

81-5161 I fit tapered roller head stem bearings to every bike I build. The cheapest handling improvement you will ever make. Improves front end stability due to increased support from larger bearing surface area. They are easier to work with, cost less and last longer than the standard ball bearings. Set of 2.

Models: 72-75 Z1, 76-80 Z900-1000

$138.17  
Disabled

81-5310   Steering Damper Z1-KZ

81-5310 Adjustable hydraulic steering damper. Available as a factory option back in the day. A good thing to have. Keeps those wobbles under control. Click image to see mounting details.

Models: 72-75 Z1

Note: Early Z1's had a mounting hole cast into the right side of the lower triple clamp. For later models you will need a 36mm steering damper fork tube clamp. You can find these on ebay.

$217.13  
Disabled

81-3281   Caliper Mount Bolts Z1 (zinc plated)

81-3281 Set of 2 x special chrome moly calliper mount bolts with washers. Zinc plated finish.

Models: 72-75 Z1

$11.84  
Disabled

81-3282   Caliper Mount Bolts Z1 (chrome)

81-3282 Set of 2 x special chrome moly calliper mount bolts with washers. Chrome plated finish

Models: 72-75 Z1

$29.61  
Disabled

81-2026   Wire Guide Set Z1-KZ (chrome)

81-2026 Set of 2 x chrome plated cable guides fitted to top triple clamp.

Models: 72-75 Z1, 76 Z900, 77-78 Z1000 A1-A2, 79-80 Z1000 MK2

$78.95  
Disabled

81-2028   Wire Guide Set Z1-KZ (stainless)

81-2028 Set of 2 x stainless steel cable guides fitted to top triple clamp.

Models: 72-75 Z1, 76 Z900, 77-78 Z1000 A1-A2, 79-80 Z1000 MK2

$59.22  
Disabled

81-2029   Instrument Cable Guides Z1-KZ

81-2029 These mount on the front brake line splitter to keep the speedo and tacho cables out of harms way. Set of 2.

Models: 72-75 Z1, 76 Z900, 77-78 Z1000 A1-A2, 79-80 Z1000 MK2

$15.79  
Disabled

81-2027   Clutch Cable Clamp Z1-KZ

81-2027 Clamps clutch cable to front left down tube on frame. Keeps cable clear of exhaust headers. Cable ties don't work very well as the cable needs to be able to move a little with the bars.

Models: 72-75 Z1, 76-80 Z900-1000

$9.87  
Disabled

156-2025   Clutch Cable Clamp Z1-KZ (coated)

156-2025 Clamps clutch cable to front left down tube on frame. Keeps cable clear of exhaust headers. Cable ties don't work very well as the cable needs to be able to move a little with the bars. I like the plastic coated version better as it does not scratch the frame and chew the cable.

Models: 72-75 Z1, 76-80 Z900-1000

$15.79  
Disabled

81-4372   Plug Lead Clamps Z1-KZ

81-4372 Set of 4 x plug lead clamps.

Models: 72-75 Z1, 76-80 Z900-1000

$29.61  
Disabled

73-182   Front Tank Rubbers Z1-KZ

73-182 Set of 2 x front tank mount rubbers.

Models: 72-75 Z1, 76-80 Z900-1000

$9.87  
Disabled

73-184   Tank Mount Washers Z1-KZ

73-184 Backing washers that fit between rubber tank mounts and frame. Set of 4 with 2 x 2.3mm and 2 x 1.0mm thickness. This allows you to shim the mounts to get the best tank fit.

Models: 72-75 Z1, 76-80 Z900-1000

$3.95  
Disabled

73-181   Fuel Tank Rear Dampers Z1-KZ

73-181 Set of 2 x rubber dampers for frame tubes under tank.

Models: 72-75 Z1, 76-80 Z900-1000

$15.79  
Disabled

73-541   Tank Strap Z1-KZ

73-541 Rubber fuel tank retaining strap.

Models: 72-75 Z1, 76-80 Z900-1000

$9.87  
Disabled

81-2415   Engine Mount Bolt Set Z1-KZ

81-2415 Complete set of engine mount hardware. Includes all nuts and spacers. Zinc plated steel.

Models: 72-75 Z1, 76-80 Z900-1000

$157.91  
Disabled

81-2015   Engine Mount Bolt Set Z1-KZ (stainless)

81-2015 Complete set of engine mount hardware in stainless steel.

Models: 72-75 Z1, 76-80 Z900-1000

NOTE: Does not include special teardrop shaped bottom mount nuts. Use the originals or buy 81-2007 as required.

$197.39  
Disabled

81-2007   Engine Mount Nut Z1-KZ

81-2007 Special teardrop shaped nut used on bottom engine mounts. Sold separately. Two required.

Models: 72-75 Z1, 76-80 Z900-1000

$15.79  
Disabled

81-5403   Engine Mount Plates Z1

81-5403 Complete set of engine mount plates.

Models: 72-75 Z1

$157.91  
Disabled

81-5401   Engine Mount Plates Z1 (stainless)

81-5401 Complete set of stainless steel engine mount plates.

Models: 72-75 Z1

$197.39  
Disabled

74-3012   Billet Front Engine Mounts Z1-KZ

74-3012 Set of PMC Billet Duralumin alloy front engine mount plates with stainless Allen bolts. Beautiful CNC machined finish. They look trick and are lighter and stronger than the originals. Improves chassis rigidity by providing a stronger engine to frame mount.

Models: 72-75 Z1, 76-80 Z900-1000

NOTE: Replaces front right and bottom right steel engine mount plates.

$197.39  
Disabled

74-3022   Billet Rear Engine Mounts Z1

74-3022 Set of PMC Billet Duralumin alloy rear engine mount plates. Includes alloy spacers to suit the thicker mounts and stainless Allen bolts. Beautiful CNC machined finish. They look trick and are lighter and stronger than the originals. Improves chassis rigidity by providing a stronger engine to frame mount.

Models: 72-75 Z1

NOTE: Replaces rear steel engine mount plates on Z1. Will not fit Z900 or Z1000.

$256.60  
Disabled

81-5431   Battery Box Z1

81-5431 Black powder coated battery box.

Models: 72-75 Z1

$394.77  
Disabled

81-1253   Battery Box Mount Kit Z1

81-1253 Hardware to mount battery box.

Models: 72-75 Z1

$29.61  
Disabled

81-1258   Battery Box Mount Kit KZ

81-1258 Hardware to mount battery box.

Models: 76-80 Z900-1000

$49.35  
Disabled

81-5433   Electrical Plate Z1

81-5433 Black powder coated electrical plate.

Models: 72-75 Z1

$217.13  
Disabled

81-1254   Electrical Plate Mount Kit Z1-KZ

81-1254 Hardware to mount electrical plate.

Models: 72-75 Z1, 76 Z900, 77-78 Z1000 A1-A2, 78 Z1R D1

$29.61  
Disabled

81-4028   Center Harness Bracket Z1-KZ (stainless)

81-4028 Stainless steel bracket for center wiring harness plugs. Fits electrical plate on battery box. Looks great and will never rust.

Models: 72-75 Z1, 76 Z900, 77-78 Z1000 A1-A2, 78 Z1R-D1

$78.95  
Disabled

81-1371   Shoulder Bolt Set Z1-KZ (stainless)

81-1371 Set of 2 x 6mm stainless steel shoulder bolts and washers. Used to mount center wiring harness bracket and chain guard. Get 2 sets to cover the entire bike.

Models: 72-75 Z1, 76-80 Z900-1000

$19.74  
Disabled

81-5434   Air Box Support Z1

81-5434 Black powder coated air box support.

Models: 72-75 Z1

$98.69  
Disabled

81-5432   Tool Box Z1

81-5432 Black powder coated tool box.

Models: 72-75 Z1

$177.65  
Disabled

69-131   Battery Tray Z1-KZ

69-131 Plastic battery tray. Protect your battery from vibration.

Models: 72-75 Z1, 76-80 Z900-1000

$59.22  
Disabled

81-1257   Battery Strap Z1

81-1257 Rubber battery strap.

Models: 72-75 Z1

$19.74  
Disabled

81-4235   Rubber Fuse Holder Z1

81-4235 Rubber mount for standard cylindrical fuse holder.

Models: 72-75 Z1

$19.74  
Disabled

81-1053   Stainless Seat Pins Z1

81-1053 Set of 2 stainless steel seat pins with R clips.

Models: 72-75 Z1, 76 Z900

$19.74  
Disabled

81-1054   Stainless Seat Pins KZ

81-1054 Set of 2 stainless steel seat pins with R clips.

Models: 77-78 Z1000 A1-A2, 79-80 Z1000 MK2

$19.74  
Disabled

156-1055   Seat Hook Z1

156-1055 Seat hook limits travel to stop seat damaging side cover. Standard zinc plated finish.

Models: 72-75 Z1

$29.61  
Disabled

156-1056   Seat Hook KZ

156-1056 Seat hook limits travel to stop seat damaging side cover. Standard zinc plated finish.

Models: 76 Z900, 77-78 Z1000 A1-A2, 79-80 Z1000 MK2

$29.61  
Disabled

81-1057   Seat Hinge Z1-KZ

81-1057 Seat hinge with mounting bolts.

Models: 72-75 Z1, 76 Z900, 77-78 Z1000 A1-A2, 79-80 Z1000 MK2

$19.74  
Disabled

81-1210   Stainless Helmet Hook Z1

81-1210 Stainless steel helmet hook (picture left).

Models: 72-75 Z1

$59.22  
Disabled

81-1211   Helmet Hook Z1 (black)

81-1211 Black painted steel helmet hook (picture right).

Models: 72-75 Z1

Out of stock 
$59.22  
No Stock

81-5339   Seat Latch Assembly Z1

81-5339 Complete seat latch assembly.

Models: 72-75 Z1

$177.65  
Disabled

81-5338   Seat Latch Rubber Z1

81-5338 Replacement cover for seat latch handle.

Models: 72-75 Z1

$9.87  
Disabled

81-1250   Side Cover Grommet Set Z1-KZ

81-1250 Complete set of 6 x grommets to mount side covers. Don't lose your covers down the road.

Models: 72-75 Z1, 76-80 Z900-1000

$29.61  
Disabled

81-1251   Duck Tail Mount Kit Z1-KZ

81-1251 Hardware to mount duck tail.

Models: 72-75 Z1, 76 Z900, 77-78 Z1000 A1-A2

$39.48  
Disabled

81-1369   Rear Guard Bracket Z1-KZ

81-1369 Stainless rear guard bracket.

Models: 72-75 Z1, 76 Z900, 77-78 Z1000 A1-A2

$39.48  
Disabled

81-1366   Rear Guard Mount Rubber Z1-KZ

81-1366 Rubber damper for rear guard bracket.

Models: 72-75 Z1, 76 Z900, 77-78 Z1000 A1-A2

$23.69  
Disabled

81-1256   Rear Guard Mount Kit Z1

81-1256 Mounting hardware for rear inner and outer guards.

Models: 72-75 Z1

$23.69  
Disabled

81-1259   Rear Guard Mount Kit KZ

81-1259 Mounting hardware for rear inner and outer guards.

Models: 76-80 Z900-1000

$39.48  
Disabled

81-4215   Rear Guard Cushions Z1-KZ

81-4215 Set of 2 rear guard cushion rubbers.

Models: 72-75 Z1, 76 Z900, 77-78 Z1000 A1-A2

$15.79  
Disabled

81-4216   Tail Light Mount Kit Z1

81-4216 Hardware to mount tail light to bracket.

Models: 72-75 Z1

$33.56  
Disabled

81-4212   Tail Light Base Mount Kit Z1-KZ

81-4212 Hardware to mount tail light bracket to rear guard.

Models: 72-75 Z1, 76 Z900, 77-78 Z1000 A1-A2

$25.66  
Disabled

81-1255   Rear Plate Damper Z1

81-1255 The rubber plug that goes in the hole at the end of the rear guard. The idea is to stop your number plate vibrating.

Models: 72-75 Z1

$9.87  
Disabled

81-5367   Rear Shock Mount Kit Z1-KZ

81-5367 Set of chrome plated hardware to mount both rear shocks.

Models: 72-75 Z1, 76-80 Z900-1000

$29.61  
Disabled

81-5368   Rear Shock Upper Dampers Z1-KZ

81-5368 Set of 2 x upper mount rubbers for rear shocks.

Models: 72-75 Z1, 76-80 Z900-1000

$9.87  
Disabled

156-5113   Footpeg Mount Kit Z1-KZ

156-5113 Set of 4 x special washers and dome nuts to mount footpeg assembly. Zinc plated stainless steel for the standard look.

Models: 72-75 Z1, 76-80 Z900-1000

$39.48  
Disabled

81-5113   Footpeg Mount Kit Z1-KZ (stainless)

81-5113 Set of 4 x stainless steel special washers and dome nuts to mount footpeg assembly.

Models: 72-75 Z1, 76-80 Z900-1000

$39.48  
Disabled

81-5112   Footpeg Stud Set Z1-KZ (stainless)

81-5112 Set of 4 stainless steel footpeg studs with special low profile lock nuts.

Models: 72-75 Z1, 76-80 Z900-1000

$69.09  
Disabled

81-5114   Footpeg Rubbers Z1-KZ

81-5114 Set of 4 x foot peg mounting rubbers.

Models: 72-75 Z1, 76-80 Z900-1000

$29.61  
Disabled

81-5110   Footpeg Assembly Z1-KZ

81-5110 Set of left and right foot pegs.

Models: 72-75 Z1, 76-80 Z900-1000

$236.86  
Disabled

81-5111   Pillion Pegs Z1-Z900

81-5111 Set of 2 pillion pegs. These are a quality reproduction with the original chrome insert.

Models: 72-75 Z1, 76 Z900

$78.95  
Disabled

86-169   Exhaust Mount Damper Z1-KZ

86-169 Rubber damper to mount exhaust. 2 required for each side. Need 4 when using 4:4 or 4:2 system. Sold separately.

Models: 72-75 Z1, 76-80 Z900-1000

$13.82  
Disabled

86-170   Exhaust Mount Bolts Z1-Z900

86-170 Set of 2 x chrome plated exhaust mount bolts. Includes special low profile lock nuts.

Models: 72-75 Z1, 76 Z900

$19.74  
Disabled

81-5471   Centre Stand Rubber Z1-Z900

81-5471 Centre stand stopper (right). Fits on standard exhaust.

Models: 72-75 Z1, 76 Z900

$9.87  
Disabled

81-5472   Side Stand Rubber Z1-Z900

81-5472 Side stand stopper (left). Fits on standard exhaust.

Models: 72-75 Z1, 76 Z900

$9.87  
Disabled

81-5230   Side Stand Kit Z1-KZ

81-5230 Replacement side stand with zinc plated mounting bolt and spring.

Models: 72-75 Z1, 76-80 Z900-1000

$138.17  
Disabled

81-5231   Stainless Side Stand Kit Z1-KZ

81-5231 Stainless steel nut, bolt and spring for side stand.

Models: 72-75 Z1, 76-80 Z900-1000

$29.61  
Disabled

81-5464   Centre Stand Z1-KZ

81-5464 Back in the day, the first thing I did was remove the centre stand so I could have more ground clearance. These days, I am not so sure. A handy thing to have.

Models: 72-75 Z1, 76 Z900, 77-78 Z1000 A1-A2, 79-80 Z1000 MK2

NOTE: Centre stand only. You may also want 81-5462 bolt set and 81-5463 spring.

$256.60  
Disabled

81-5462   Center Stand Bolt Set Z1-KZ

81-5462 Set of 2 special mounting bolts and nuts for center stand.

Models: 72-75 Z1, 76 Z900, 77-78 Z1000 A1-A2, 79-80 Z1000 MK2

$59.22  
Disabled

81-5463   Center Stand Spring Z1-KZ

81-5463 Replace that sagging old center stand spring.

Models: 72-75 Z1, 76 Z900, 77-78 Z1000 A1-A2, 79-80 Z1000 MK2

$23.69  
Disabled

81-5280   Swing Arm Bush Kit Z1-Z900

81-5280 Teflon bushes with stainless distance collar. Better than the standard fitting but not as good as the needle roller kit.

Models: 72-75 Z1, 76 Z900

$236.86  
Disabled

81-5290   Needle Roller Swing Arm Kit Z1-KZ

81-5290 Fit needle roller bearings to your swing arm. Improved stability and bearing life. Also a lot less drag on your suspension.

Models: 72-75 Z1, 76-80 Z900-1000

NOTE: The brass bushes are used for fitment to Z1 / Z900. For use on 77 Z1000 onwards they are not required.

$296.08  
Disabled

81-5291   Swing Arm Bolt Z1-KZ

81-5291 Chrome plated swing arm pivot bolt made from heat treated S45C steel.

Models: 72-75 Z1, 76-80 Z900-1000

$98.69  
Disabled

156-5295   Chain Adjust Stoppers Z1-KZ

156-5295 Set of 2 x chain adjuster stoppers with 8mm mounting bolts.

Models: 72-75 Z1, 76-80 Z900-1000

$69.09  
Disabled

156-5250   Chain Adjusters Z1 (early 8mm chrome)

156-5250 Set of 2 x chrome plated chain adjusters with 8mm bolts.

Models: 72-75 Z1

NOTE: The stronger 10mm version will also fit Z1.

$167.78  
Disabled

81-5250   Chain Adjusters Z1 (early 8mm stainless)

81-5250 Set of 2 x stainless steel chain adjusters with 8mm bolts.

Models: 72-75 Z1

NOTE: The stronger 10mm version will also fit Z1.

$157.91  
Disabled

156-5251   Chain Adjusters Z1-KZ (late 10mm zinc plate)

156-5251 Set of 2 x stainless steel chain adjusters with 10mm bolts. These have been zinc plated to retain the standard finish.

Models: 72-75 Z1, 76-80 Z900-1000

$167.78  
Disabled

81-5251   Chain Adjusters Z1-KZ (late 10mm stainless)

81-5251 Set of 2 x stainless steel chain adjusters with 10mm bolts.

Models: 72-75 Z1, 76-80 Z900-1000

$157.91  
Disabled

81-5246   Rear Axle Kit Z1-Z900 (stainless)

81-5246 Stainless steel rear axle kit.

Models: 72-75 Z1, 76 Z900

$256.60  
Disabled

81-5247   Rear Axle Kit Z1000 (stainless)

81-5247 Stainless steel rear axle kit.

Models: 77-78 Z1000 A1-A2

$256.60  
Disabled

81-5244   Front Axle Kit Z1 (stainless)

81-5244 Stainless steel front axle kit.

Models: 72-75 Z1

$98.69  
Disabled

81-5245   Front Axle Kit KZ (stainless)

81-5245 Stainless steel front axle kit.

Models: 76 Z900, 77-78 Z1000 A1-A2, 79-80 Z1000 MK2, 78-80 Z1R D1-D3

$118.43  
Disabled

159-1009   Wheel Bearing Set Z1-KZ

159-1009 Complete set of 5 bearings for front and rear wheels. These are the slightly more expensive LLU type with double rubber seals. This gives you the best water and dust resistance.

Models: 72-75 Z1, 76-80 Z900-1000

$98.69  
Disabled

74-491   Front Wheel Bearing Spacer Z1 (stainless)

74-491 Stainless front wheel bearing spacer. See picture right.

Models: 72-75 Z1

$39.48  
Disabled

74-492   Rear Wheel Bearing Spacer Z1-Z900 (stainless)

74-492 Stainless rear wheel bearing spacer. See picture left.

Models: 72-75 Z1, 76 Z900 (drum brake)

$59.22  
Disabled

87-0020   Front Sprocket Nut Z1-KZ

87-0020 Low profile (10mm) M20 x 1.5 front sprocket nut.

Models: 72-75 Z1, 76-80 Z900-1000

$19.74  
Disabled

87-0021   Front Sprocket Lock Washer Z1-KZ

87-0021 Front sprocket tab washer.

Models: 72-75 Z1, 76-80 Z900-1000

$7.90  
Disabled

87-0030   Rear Sprocket Nuts Z1-KZ

87-0030 Set of 6 self locking flange nuts for rear sprocket. Replaces the standard hex nuts and lock washers. I would still use a little thread lock.

Models: 72-75 Z1, 76-80 Z900-1000

$25.66  
Disabled

87-0031   Rear Sprocket Tab Washers Z1-Z900 (stainless)

87-0031 Set of stainless nuts and tab washers for rear sprocket.

Models: 72-75 Z1, 76 Z900

$29.61  
Disabled

87-0091   Rear Sprocket Stud Set Z1-KZ

87-0091 Set of 6 x rear sprocket studs.

Models: 72-75 Z1, 76-80 Z900-1000

$59.22  
Disabled

81-3180   Rear Cush Drive Rubbers Z1-Z900

81-3180 Set of 6 x rear hub dampers.

Models: 72-75 Z1, 76 Z900 (drum brake)

$98.69  
Disabled

81-3182   Rear Cush Drive Rubber Z1000

81-3182 Rear hub damper (new product).

Models: 77-78 Z1000 A1-A2

$236.86  
Disabled

72-5141   Front Rim Z1-KZ (chrome)

72-5141 DID standard front rim. Chrome plated steel. 40 hole 1.85 x 19.

Models: 72-75 Z1, 76 Z900, 77-78 Z1000 A1-A2

$177.65  
Disabled

72-5142   Rear Rim Z1-KZ (chrome)

72-5142 DID standard rear rim. Chrome plated steel. 40 hole 2.15 x 18.

Models: 72-75 Z1, 76 Z900, 77-78 Z1000 A1-A2

$217.13  
Disabled

72-5171   Front Spoke Set Z1

72-5171 OEM front spoke set. Original finish with zinc plated spokes and gold chromate nipples. They look great and the price is right.

Models: 72-75 Z1 (6 hole disk)

$138.17  
Disabled

72-5172   Rear Spoke Set Z1-Z900

72-5172 OEM rear spoke set. Original finish with zinc plated spokes and gold chromate nipples. They look great and the price is right.

Models: 72-75 Z1, 76 Z900 (drum brake)

$157.91  
Disabled

72-5173   Front Spoke Set KZ

72-5173 OEM front spoke set. Original finish with zinc plated spokes and gold chromate nipples. They look great and the price is right.

Models: 76 Z900, 77-78 Z1000 A1-A2 (4 hole disk)

$138.17  
Disabled

72-5174   Rear Spoke Set Z1000

72-5174 OEM rear spoke set. Original finish with zinc plated spokes and gold chromate nipples. They look great and the price is right.

Models: 77-78 Z1000 A1-A2 (disk brake)

$157.91  
Disabled

173-001   Front Sprocket Z1-KZ (630 x 15)

173-001 Standard 630 x 15T front sprocket.

Models: 72-75 Z1, 76-80 Z900-1000

$69.09  
Disabled

173-011   Rear Sprocket Z1-Z900 (630 x 35)

173-011 Standard 630 x 35T rear sprocket.

Models: 72-75 Z1, 76 Z900 (drum brake)

$128.30  
Disabled

173-014   Rear Sprocket Z1-Z900 (630 x 42)

173-014 630 x 42T rear sprocket.

Models: 72-75 Z1, 76 Z900 (drum brake)

$128.30  
Disabled

85-020   Rear Sprocket Z1000 (630 x 33)

85-020 Standard 630 x 33T rear sprocket.

Models: 77-80 Z1000 (disk brake)

$128.30  
Disabled

173-021   Rear Sprocket Z1000 (630 x 35)

173-021 630 x 35T rear sprocket.

Models: 77-80 Z1000 (disk brake)

$128.30  
Disabled

85-024   Rear Sprocket Z1000 (630 x 42)

85-024 630 x 42T rear sprocket.

Models: 77-80 Z1000 (disk brake)

Out of stock 
$128.30  
No Stock

156-5100   Standard Bars Z1-KZ

156-5100 Original style bars. Width 83cm, Height 16cm.

Models: 72-75 Z1, 76-80 Z900-1000

$88.82  
Disabled

74-0020   Frame Brace Kit Z1-KZ

74-0020 Improve handling with a 15 piece chrome molly frame brace kit.

Models: 72-75 Z1, 76-80 Z900-1000

NOTE: Recommended installation by a motorcycle frame specialist. I suggest this is done with the engine and swing arm fitted. You need to ensure that the frame is straight and geometry is correct before and after installation. You don’t want anything pulled out of shape.

$493.47  
Disabled

73-1130   Tail Tidy Z1

73-1130 Clean up the rear end with a tail tidy. Eliminates the rear guard and tail light / number plate bracket. Beautiful light weight, all aluminium construction. No frame modifications required.

Models: 72-75 Z1

$296.08  
Disabled

73-1137   Tail Tidy KZ

73-1137 Clean up the rear end with a tail tidy. Eliminates the rear guard and tail light / number plate bracket. Beautiful light weight, all aluminium construction. No frame modifications required.

Models: 76 Z900, 77-78 Z1000 A1-A2

Note: Designed for the Z1 oval tail light. Drilling required to fit the rectangular Z900/1000 tail light.

$296.08  
Disabled