Kawasaki Z1000 Mk2 Fuel And Air

Prices based on Japanese RRP
ANZ Daily Rate 1.00 AUD = 69.76 JPY
All prices include 10% GST

Click any image for a detailed view

81-2240   Inlet Mainfold Rubbers Z1-KZ

81-2240 Set of 4 x inlet manifold rubbers. These perish over time and develop cracks. You don't want air leaks in your inlet manifolds. Hard rubber also makes it difficult to remove and install carburetors.

Models: 72-75 Z1, 76-80 Z900-1000

$114.99  

14-9411   Inlet Manifold Clamps Z1-KZ

14-9411 Set of 4 x inlet manifold clamps.

Models: 72-75 Z1, 76-80 Z900-1000

$34.50  

14-9413   Inlet Manifold Screws

14-9413 Set of 8 x Phillips head screws for inlet manifold rubbers.

Models: 72-75 Z1, 76-80 Z900-1000

$5.75  

14-9412   Inlet Mainfold Allen Bolts

14-9412 Set of 8 x Allen bolts for inlet manifold rubbers.

Models: 72-75 Z1, 76-80 Z900-1000

$5.75  

81-2363   Air Box Rubbers KZ

81-2363 Set of 4 x air box to carburettor rubbers. New flexible rubbers make it a lot easier to remove and install the carbs.

Models: 76-80 Z900-1000

$143.74  

14-9409   Air Box Clamps Z1-KZ

14-9409 Set of 4 x air box to carburettor clamps.

Models: 72-75 Z1, 76-80 Z900-1000

$34.50  

81-2161   Air Filter Z1000

81-2161 Replacement air filter. Picture centre.

Models: 77-80 Z1000, 76 Z900 (see note)

NOTE: Everybody says that this filter fits a Z900. This is not correct. An exact reproduction of the Z900 filter is not available anywhere. With a little work this filter will do the job. It is shorter than the original so you will need a foam rubber block on the bottom of the filter or air box to lift it approx 15mm so it seals correctly. Fitting a small L bracket or block in the bottom of the air box will prevent the base of the filter moving forward.

$38.33  

81-1221   Fuel Cap Gasket Z1000 MK2

81-1221 Fuel cap rubber gasket.

Models: 79-80 Z1000 MK2

$9.58  

81-2303   Vacuum Fuel Tap Z1000 A2-MK2

81-2303 This is a reproduction of a Z1000J vacuum operated fuel tap. It can be used as a replacement on earlier models fitted with vacuum taps. It has a single 8mm outlet and 44mm pitch for mounting bolts. Mounting hardware is included. Overhaul kits are available. See 81-2151.

Models: 78 Z1000 A2, 79-80 Z1000 MK2

$191.65  

81-2151   Fuel Tap Overhaul Kit

81-2151 This is an overhaul kit for the 81-2303 vacuum fuel tap.

Models: 81-2303 Fuel Tap Only

NOTE: This kit will not fit genuine Z1000 A2-MK2 fuel taps.

$95.82  

72-444   Fuel Line Z1-KZ (8mm)

72-444 A 50cm length of 8mm fuel line. This is the good quality OEM stuff.

$11.50  

72-442   Fuel Line Clamps Z1-KZ

72-442 Set of 2 hose clamps for 8mm fuel line.

$5.75  

81-2181   Overflow Hose Set Z1-KZ

81-2181 Replace those fossilised overflow hoses. I have not been able to find this size fuel proof hose in Australia. You get 2 metres of 3mm hose with 4 clips.

Models: 72-75 Z1, 76-80 Z900-1000

$23.00  

81-2182   Overflow Hose Clamp Z1-KZ

81-2182 Rubber clip that keeps the carburettor overflow hoses out of the way.

Models: 72-75 Z1, 76-80 Z900-1000

$13.42  

81-2188   Carburetor Fuel Line Joint MK2

81-2188 Fuel line junction between hose and carbs 1 and 2.

Models: 79-80 Z1000 MK2, 79-80 Z1R D2-D3

$76.66  

81-2189   Carburetor Fuel Pipe MK2

81-2189 Fuel line junction between carbs 3 and 4.

Models: 79-80 Z1000 MK2, 79-80 Z1R D2-D3

$28.75  

81-2179   Carburetor Top Gaskets KZ

81-2179 Set of 4 x carburetor top gaskets (picture left).

Models: 76-80 Z900-1000

$30.66  

81-2113   Carburetor Base Gaskets MK2

81-2113 Set of 4 x carburettor float bowl gaskets.

Models: 79-80 Z1000 MK2, 79-80 Z1R D2-D3

$67.08  

81-2115   Carburetor Screw Kit KZ (stainless)

81-2115 Complete set of 28 x stainless screws for carburettor top caps, float bowls and accelerator pump.

Models: 76-80 Z900-1000

$9.58  

81-2202   Carburetor Overhaul Kit KZ

81-2202 Set of 4 x OEM carburetor overhaul kits. Includes float bowl gaskets for early and late model carbs. You get a selection of needles, idle and main jets to suit different models. Use the old gaskets and jet numbers as a guide.

Models: 76-80 Z900-1000

$191.65  

81-2176   Accelerator Pump Kit MK2

81-2176 Overhaul kit for MK2 carbs with accelerator pump.

Models: 79-80 Z1000 MK2, 79-80 Z1R D2-D3

$57.49  

81-2501   Carburetor Float KZ

81-2501 Carburettor float. Sold separately

Models: 76-80 Z900-1000

$143.74  

14-9421   Fuel Line T Junction (6mm)

14-9421 6mm fuel line T junction. Handy if modifying the fuel lines.

$7.67  

14-9422   Fuel Line T Junction (8mm)

14-9422 8mm fuel line T junction. Handy if modifying the fuel lines.

$7.67  

14-9423   Fuel Line Y Junction (6mm)

14-9423 6mm fuel line Y junction. Handy if modifying the fuel lines.

$7.67  

14-9424   Fuel Line Y Junction (8mm)

14-9424 8mm fuel line Y junction. Handy if modifying the fuel lines.

$7.67  

14-9429   Fuel Line Adapter (6mm to 8mm)

14-9429 Aluminium 6mm to 8mm fuel line adapter.

Out of stock 
$15.33  
No Stock

81-2180   Fuel Filter (6mm straight)

81-2180 Inline fuel filter for 6mm hose.

$7.67  

81-2183   Fuel Filter (6mm 90 degree)

81-2183 Inline L type fuel filter for 6mm hose.

$17.25  

81-2186   Fuel Filter (8mm straight)

81-2186 Inline fuel filter for 8mm hose. Suit Z1, CB750 etc.

$23.00  

81-2187   Fuel Filter (8mm 90 degree)

81-2187 Inline L type fuel filter for 8mm hose. Suit Z1, CB750 etc.

$23.00  

81-2184   Fuel Line Elbow

81-2184 A 90 degree fuel line elbow. If don't have a lot of room and your hoses are kinking, this will solve the problem. Suits 8mm hose.

$23.00